Converter module Tibbo DS1100P Serial/Ethernet programmable, RS232, single channel,  PoE

Brief description

Dual mode device: depending on the uploaded firmware it can operate as a fix serial-Ethernet converter or a Basic programmable controller. Every serial device can easily be made ethernet accessible by using a DS1100. It provides a cost-effective, easy to develop alternative compared to embedded Linux systems.

Properties

• 10/100BaseT Ethernet port
• Single-channel RS232 port (DB9)
• Power input through DB9
• Optional power-over-Ethernet
• Compact (90x48x25mm)
• DIN rail, wall mounting plates included

Mentés

Technical Description

Superior upgrade to the DS203 device.
Based on the high-performance T2000 IC.
10/100BaseT, auto-MDIX Ethernet port.
Optional power-over-Ethernet.
Single-channel RS232 port on DB9M connector:
TX, RX, RTS, CTS, DTR, and DSR lines;
Baudrates of up to 115200bps;
None/even/odd/mark/space parity modes;
7/8 bits/character modes;
“12V” power input on pin 9 of the DB9.
512KB flash memory for firmware and application.
200 bytes of EEPROM space for data storage.
Three LEDs:
Green and red main status LEDs;
Yellow Ethernet link LED.
Power: 12VDC nominal (min. 9V, max. 18V).
Dimensions: 90x48x25mm.
Operating temperature range: -5 ~ 70 C.h)
Firmware is upgradeable through the serial port or network
Included accessories:
DIN rail mounting plate
Wall mounting plate and two screws

Types

DS1100: 1 csatornás RS232 / Ethernet konverter, programozható vezérlő
DS1101: 3.5 csatornás RS232 / Ethernet konverter, programozható vezérlő
DS1102: 3 csatornás RS232 / RS422/RS485 / Ethernet konverter, programozható vezérlő.
A DS1101 és DS1102 típusokhoz opcionális 802.11b/g Wi-Fi interfész, OLED kijelző és POE (power-over-Ethernet) tápellátás is elérhető

Options

• Opcionális POE (power-over-Ethernet) tápellátás*